We at DealStartsHere though we'd point out the Most Common PS3 Problems/Issues/YLOD. It seems that a large volume of PS3 have either died from overheating, broken DVD drives, or power supply failures. When dealing with these failures and/or defects, it's important that you DO NOT attempt to fix the PS3 on your own, unless you have proper documentation and know-how on repairing electronics! Typically the warranty on your PS3 is only good for 1 year from the date of purchase printed on the actual receipt.
Here are the top 5 Common Most Problems a PS3 can experience:
1. No Audio or Video. distorted Video, Interlacing Lines, only HDMI displays Video, or HDMI doesn't display video. Typically if you have one of these problems it's due to the YLOD (Yellow Light of Death).
2. XMB Bar or Menu freezes or crashes.
3. Overheating. The PS3 is designed to shut off if it detects a certain temperature. Usually it's because of poor air circulation (location of PS3 relative to space) or years and years of dust built up inside the system (it's almost like suffocating a PS3 of oxygen!)
4. DVD Drive does not read games, blu-ray movies, DVD's, and/or CD's. Several users have experienced extended load times, freezing in-game, noticeable choppiness, or the DVD drive sometimes working, other times not.
5. No power. PS3 does not show any signs of life what so ever, three beeps, or red blinking lights.
Possible Solutions to Fixing One or More of the Above:
1. NO AUDIO OR VIDEO: If for any reason you have any of the symptoms mentioned above, the first step would be to perform a manual display reset. You can perform a manual display reset by holding down the power button after powering up your PS3. You can release the power button after you hear 2 beeps and the PS3 will try to reset the video.
If manually resetting the video doesn't work your PS3 may have been subject to the YLOD or Yellow Light of Death. Basically, the Yellow Light of Death happens, when your PS3 overheats and causes the Graphics Chip (RSX Chip) to separate from the motherboard. Once the chip separates from the motherboard, your PS3 will detect this and give an error.
The YLOD is one of the most common problems experienced by users. Unfortunately, it is extremely difficult to fix on your own and any or all tutorials on how to fix this problem are only temporary.
Fortunately, you can purchase a new RSX Graphics Chip HERE and ask a repair shop to remove the old chip and put the new one in. We found that http://www.gadgetgrave.com was a reliable and effective source to fix your PS3 or Xbox 360.
2. XMB MENU FREEZING: Although this is a very common problem, it's also the easiest of the five to fix! You perform a System Restore by going into SETTINGS -> SYSTEM RESTORE.
Unfortunately, it will erase everything and reboot the system. I have heard of several users who have removed their PS3's Hard Drive to backup some data.
3. OVERHEATING: The number one cause of overheating is dust accumulation! Dust will build up in the fan and the vents, restricting the flow of air out of the PS3. Luckily this fix isn't too difficult either. You can take your PS3 outside and blow compressed air all around the vents to break up the dust build up. If this doesn't work you may have to replace your fan, as it has lived its life to the fullest and is dying slowly! You can purchase some replacement fans HERE.
Another, more dangerous, solution would be to clean and reapply the thermal compound on the GPU and CPU of your PS3. You can look on YouTube or Google for tutorials on how to do this.
4. DVD DRIVE DOESN'T READ DISCS: It seems a large number of users who are experiencing this problem are victims of the Sony defect. The DVD Drives typically last an average of 1 to 3 years with average usage.
The number one solution to this problem is to replace the entire DVD drive itself! you can find a lot of PS3 repair parts HERE.
Another solution would be to clean the lens itself with a Q-Tip and cleaning solution. CAUTION: the lens is extremely sensitive, clean with care! If you do mess up the lasers lens, you can buy some replacement ones HERE.
5. NO POWER: Usually power failure isn't a big problem, so you haven't much to worry about! You can easily swap out this power supply by yourself! Open up your PS3 and remove the power supply and write down the model number. You can buy replacement power supplies HERE.
Hopefully this small guide/tutorial will help you with whichever common PS3 problem you have. Again you can buy a lot of PS3, Xbox 360, Wii, PSP, DSi, iPhone, iPod, iPad, and Laptop Repair Parts HERE.
Tuesday, March 15, 2011
Friday, March 11, 2011
DealStartsHere: Tax Season Stimulus SALE!
Thursday, February 24, 2011
JEWELRY, HEALTH, BEAUTY, and PETS
Tuesday, February 22, 2011
DealStartsHere: Extreme Deal Fridays!
Friday, February 18, 2011
How to replace your Broken or Cracked iPhone Screen
Here's a guide on how to JAILBREAK your iPhone iOS 4.2.1:
This guide will show you how to replace your iPhone screen.
Before you proceed I suggest you backup any or all information currently stored on your iPhone.
Tools Required:
-Replacement Glass. I found a good quality replacement screen with digitizer here for cheap. They also carry replacement LCD screens and other iPhone replacement/reparation tools.
-#00 Phillips screwdriver
-Razor blade, or wedging/scraping tool
-Q-tips and rubbing alcohol
-Hair dryer or heat gun
-Scissors and double-sided tape or superglue
-Optional: Tweezers/small suction cup
Step 1: At the bottom of your iPhone there are 2 screws on either side of the USB connector. Use the #00 Phillips screwdriver to remove those screws. Don't worry about removing the SIM card.
Step 2: Using the wedge, scraping tool, or razor blade (works best), split the metal from the rubber around the iPhone and lift the screen. Be careful not to fully detach the screen as it is still connected to the iPhone!
Optional: Use the suction cup, if purchased, and place the suction cup above the home button and gently pull up.
Step 3: Search for flaps on the top right, holding the screen and phone together. There should be labels 1 and 2 on a bright circular orange sticker on the flaps. Lift these two flaps with your wedge tool.
Step 4: Search for a third sticker under the #2 flap. In order to release the #3 connection, you must life the black "clamp." Once the clamp is lifted the screen will be free from the iPhone, simply remove it.
Step 5: With the #00 phillips screwdriver remove 6 more screws. There are 5 screws on the side rails (3 on the side with flaps and 2 on the other side). The last screw is on the top right. Don't worry about the screw placement as they are all the same. Some screws may have black tape over them, simply remove the black tape, as it is unnecessary.
Step 6: Separate the LCD screen from the glass. Put your wedge between the rails and wedge the inner piece out. The LCD needs to slide down towards the Home button to avoid the top flanges. The metal does not deform, so don't be afraid to apply pressure.
Step 7: Remove any broken glass or shards from the metal frame. Using the hair dryer or heat gun is recommended in removing the pieces of glass. Also use the Q-tips and rubbing alcohol to remove any adhesive. Careful not to bend the metal while applying heat as the heat causes it to easily deform!
Step 8: Prepare the new glass screen. If using double sided tape, be sure to cut out the correct size. If using superglue, be sure you do not apply it near the home button. Only apply your choice of adhesive to the black plastic on the bottom or top. Stay away from the middle. You wouldn't want to glue the home button or listening piece on the top. Let the adhesive set. If using double sided tape, use tweezers to shape it, avoid getting oils on the tape from your fingers. Be sure to remove the plastic cover, if any, on the new glass.
Step 9: Reassemble the screen/LCD. Put the LCD screen and glass back together. The screen can fit one of two ways, in which only one is correct. On one side, the rail is much longer. It may be easier to slide the LCD in from the bottom.
Step 10: Reassemble the iPhone. Re-read Steps 5 - 1 and reverse engineer the iPhone. Be sure to take your time when reassembling flaps #1 to #3.
How to Replace a Broken Sony DSC-T90 Digital Camera LCD Screen
This is a step-by-step guide on how to replace a broken LCD screen for the Sony DSC T90 Digital Camera.










Tools Required:
-Replacement LCD screen. Can be bought HERE.
-Small Phillips Screw driver.
-Soldering Iron
-Solder
Step 1: Remove the battery. There are 4 screws total holding the outer shell of the camera. One on each corner (red circles). To reach the bottom two, you have to slide the camera cover up. Vise versa for the top two. *There may be a few extra screws you have to unscrew*
Step 2: Separate the front and back housings carefully. Be careful not to pry it apart as they are connected together by the LCD ribbon cables. Once you have separated the two housings unplug the LCD ribbon cables. (there should be three. One big one and two small ones). *There may be a few extra screws you have to unscrew*
Step 3: Remove the LCD screen from the housing. You'll have to carefully lift the internal components of the camera in order to remove the LCD screen.
Step 4: Get your new LCD screen ready and prep the soldering iron.
Here is a side-by-side comparison of the screens:
Step 5: Remove the solder that's holding the LCD screen to the touch sensor. (see picture)
Step 6: After removing the solder separate the LCD screen and the touch sensor. Be sure to save the white plastic backing, as we will be needing this for later.
Step 7: Re-solder the new LCD screen to the old touch sensor. After re-soldering, carefully place the LCD back onto the white plastic backing. Make sure the edges lock in.
Step 8: Re-connect the LCD ribbons (all three) and re-assemble the camera (reverse engineering!). All done.
You can pretty much apply the concept of removing/engineering to any Digital Camera.
CHECK OUT MY OTHER GUIDES:
Subscribe to:
Posts (Atom)